QTECH QSW-3400 Инструкция по настройке - Manual (Page 370)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
369
no mac-authentication-bypass enable
Port Mode
mac-authentication-bypass enable
no mac-authentication-bypass enable
Enable the port MAB authentication function.
2. Configure MAB authentication username and password
Command Explanation
Global Mode
mac-authentication-bypass username-
format {mac-address | {fixed username
WORD password WORD}}
Set the authentication mode of MAB
authentication function.
3. Configure MAB parameters
Command Explanation
Port Mode
mac-authentication-bypass binding-limit
<1-100>
no mac-authentication-bypass binding-
limit
Set the max MAB binding-limit of the port.
Global Mode
mac-authentication-bypass timeout
offline-detect (0|<60-7200>)
no mac-authentication-bypass timeout
offline-detect
Set offline detection interval.
mac-authentication-bypass timeout quiet-
period <1-60>
no mac-authentication-bypass timeout
quiet-period
Set quiet-period of MAB authentication.
mac-authentication-bypass timeout stale-
period <0-60>
no mac-authentication-bypass timeout
stale-period
Set the time that delete the binding after the
port is down.
mac-authentication-bypass spoofing-
garp-check enable
no mac-authentication-bypass spoofing-
garp-check enable
Enable the spoofing-garp-check function, MAB
function will not deal with spoofing-garp any
more; the no command disables the function.
authentication mab {radius | none} Configure the authentication mode and priority