QTECH QSW-3400 Инструкция по настройке - Manual (Page 207)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
206
24.2.2 IP Configuration
Layer 3 interface can be configured as IPv4 interface, IPv6 interface.
24.2.2.1 IPv4 Address Configuration
IPv4 address configuration task list:
1. Configure the IPv4 address of three-layer interface
2. Configure the default gateway
1. Configure the IPv4 address of three-layer interface
Command Explanation
VLAN Interface Configuration Mode
ip address <ip-address> <mask> [secondary]
no ip address [<ip-address> <mask>]
Configure IP address of VLAN
interface; the no ip address [<ip-
address> <mask>] command cancels
IP address of VLAN interface.
2. Configure the default gateway
Command Explanation
Global Mode
ip default-gateway <A.B.C.D>
no ip default-gateway <A.B.C.D>
Configure the default gateway of the
route. The no command cancels the
configuration.
24.2.2.2 IPv6 Address Configuration
The configuration Task List of IPv6 is as follows:
1. IPv6 basic configuration
(1) Configure interface IPv6 address
(2) Configure default gateway
2. IPv6 Neighbor Discovery Configuration
(1) Configure DAD neighbor solicitation message number
(2) Configure send neighbor solicitation message interval
(3) Configure static IPv6 neighbor entries
(4) Delete all entries in IPv6 neighbor table
1. IPv6 Basic Configuration
(1) Configure interface IPv6 address