QTECH QSW-3400 Инструкция по настройке - Manual (Page 427)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
426
58.2 RSPAN Configuration Task List
1. Configure RSPAN VLAN
2. Configure mirror source port(cpu)
3. Configure mirror destination port
4. Configure reflector port
5. Configure remote VLAN of mirror group
1. Configure RSPAN VLAN
2. Configure mirror source port(CPU)
3. Configure mirror destination port
Command Explanation
Global Mode
monitor session <session> destination
interface <interface-number>
no monitor session <session> destination
interface <interface-number>
To configure mirror destination interface; The
no command deletes the mirror destination
port.
4. Configure reflector port
Command Explanation
VLAN Configuration Mode
remote-span
no remote-span
To configure the specified VLAN as RSPAN
VLAN. The no command will remove the
configuration of RSPAN VLAN.
Command Explanation
Global Mode
monitor session <session> source
{interface <interface-list> | cpu [slot
<slotnum>]} {rx| tx| both}
no monitor session <session> source
{interface <interface-list> | cpu [slot
<slotnum>]}
To configure mirror source port; The no
command deletes the mirror source port.
Command Explanation
Global Mode