QTECH QSW-3400 Инструкция по настройке - Manual (Page 146)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
145
VLAN ID according to the user requirements so to exchange data across different VLANs.
VLAN translation supports ingress translation, and switch over the VLAN ID at the ingress.
Application and configuration of VLAN translation will be explained in detail in this section.
18.4.2 VLAN-translation Configuration
Configuration task sequence of VLAN-translation:
1. Configure the VLAN-translation function on the port
2. Configure the VLAN-translation relations on the port
3. Configure whether the packet is dropped when checking VLAN-translation is failing
4. Show the related configuration of vlan-translation
1. Configure the VLAN-translation of the port
2. Configure the VLAN-translation relation of the port
3. Configure whether the packet is dropped when checking VLAN-translation is failing
4. Show the related configuration of vlan-translation
Command Explanation
Port mode
vlan-translation enable
no vlan-translation enable
Enter/exit the port VLAN-translation mode.
Command Explanation
Global/Port mode
vlan-translation <old-vlan-id> to <new-vlan-
id> in
no vlan-translation old-vlan-id in
Add/delete a VLAN-translation relation.
Command Explanation
Port mode
vlan-translation miss drop {in | out | both}
no vlan-translation miss drop {in | out | both}
Configure the VLAN-translation packet
dropped on port if there is any failure.
Command Explanation
Admin mode
show vlan-translation Show the related configuration of vlan-