QTECH QSW-3400 Инструкция по настройке - Manual (Page 312)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
311
Standard IPv6 ACL Mode
[no] {deny | permit} {{<sIPv6Prefix/sPrefixlen>} | any-
source | {host-source <sIPv6Addr> }}
Creates a standard name-based
IPv6 access rule; the no form
command deletes the name-
based standard IPv6 access
rule.
3) Exit name-based standard IP ACL configuration mode
Command Explanation
Standard IPv6 ACL Mode
exit
Exits name-based standard
IPv6 ACL configuration mode.
2. Configuring packet filtering function
(1) Enable global packet filtering function
Command Explanation
Global Mode
firewall enable Enables global packet filtering function.
firewall disable Disables global packet filtering function.
3. Configuring time range function
(1) Create the name of the time range
Command Explanation
Global Mode
time-range <time_range_name>
Create a time range named
time_range_name.
no time-range <time_range_name>
Stop the time range function named
time_range_name.
(2) Configure periodic time range
Command Explanation
Time range Mode
absolute-periodic {Monday | Tuesday | Wednesday |
Thursday | Friday | Saturday | Sunday} <start_time> to
{Monday | Tuesday | Wednesday | Thursday | Friday |
Saturday | Sunday} <end_time>
Configure the time range for the
request of the week, and every
week will run by the time range.