QTECH QSW-3400 Инструкция по настройке - Manual (Page 291)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
290
specific VLAN.
ipv6 mld snooping vlan <vlan-id>
limit {group <g_limit> | source
<s_limit>}
no ipv6 mld snooping vlan <vlan-id>
limit
Configure the number of the groups in which the
MLD Snooping can join, and the maximum number
of sources in each group. The “no” form of this
command restores to the default.
ipv6 mld snooping vlan <vlan-id> l2-
general-querier
no ipv6 mld snooping vlan <vlan-id>
l2-general-querier
Set the VLAN level 2 general querier, which is
recommended on each segment. The “no” form of
this command cancels the level 2 general querier
configuration.
ipv6 mld snooping vlan <vlan-id>
mrouter-port interface <interface –
name>
no ipv6 mld snooping vlan <vlan-id>
mrouter-port interface <interface
–
name>
Configure the static mrouter port in specific vlan. The
“no” form of this command cancels the mrouter port
configuration.
ipv6 mld snooping vlan <vlan-id>
mrouter-port learnpim6
no ipv6 mld snooping vlan <vlan-id>
mrouter-port learnpim6
Enable the function that the specified VLAN learns
mrouter-port (according to pimv6 packets), the no
command will disable the function.
ipv6 mld snooping vlan <vlan-id>
mrpt <value>
no ipv6 mld snooping vlan <vlan-id>
mrpt
Configure the keep-alive time of the mrouter port.
The “no” form of this command restores to the
default.
ipv6 mld snooping vlan <vlan-id>
query-interval <value>
no ipv6 mld snooping vlan <vlan-id>
query-interval
Co
nfigure the query interval. The “no” form of this
command restores to the default.
ipv6 mld snooping vlan <vlan-id>
immediate-leave
no ipv6 mld snooping vlan <vlan-id>
immediate-leave
Configure immediate leave multicast group function
for the MLD Snooping of specific VLAN
. The “no”
form of this command cancels the immediate leave
configuration.
ipv6 mld snooping vlan <vlan-id>
query-mrsp <value>
no ipv6 mld snooping vlan <vlan-id>
query-mrsp
Configure the query maximum response period. The
“no” form of this command restores to the default.