QTECH QSW-3400 Инструкция по настройке - Manual (Page 252)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
251
Chapter 32 DHCP option 60 and option 43
Introduction to DHCP option 60 and option 43
DHCP server analyzes DHCP packets from DHCP client. If packets with option 60, it will
decide whether option 43 is returned to DHCP client according to option 60 of packets and
configuration of option 60 and option 43 in DHCP server address pool.
Configure the corresponding option 60 and option 43 in DHCP server address pool:
1. Address pool configured option 60 and option 43 at the same time. The received DHCP
packet with option 60 from DHCP client, if it matches with option 60 of DHCP server
address pool, DHCP client will receive the option 43 configured in the address pool, or else
do not return option 43 to DHCP client.
2. Address pool only configured option 43, it will match with any option 60. If the received
DHCP packet with option 60 from DHCP client, DHCP client will receive the option 43
configured in the address pool.
3. Address pool only configured option 60, it will not return option 43 to DHCP client.
4. DHCP option 60 and option 43 Configuration Task List
1. Basic DHCP option 60 and option 43 configuration
Command Explanation
Address pool configuration mode
option 60 ascii LINE
Configure option 60 character string with ascii format in ip dhcp
pool mode.
option 43 ascii LINE
Configure option 43 character string with ascii format in ip dhcp
pool mode.
option 60 hex WORD
Configure option 60 character string with hex format in ip dhcp
pool mode.
option 43 hex WORD
Configure option 43 character string with hex format in ip dhcp
pool mode.
option 60 ip A.B.C.D
Configure option 60 character string with IP format in ip dhcp pool
mode.
option 43 ip A.B.C.D
Configure option 43 character string with IP format in ip dhcp pool
mode.
no option 60 Delete the configured option 60 in the address pool mode.
no option 43 Delete the configured option 43 in the address pool mode.