QTECH QSW-3400 Инструкция по настройке - Manual (Page 286)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
285
ip igmp snooping vlan <vlan-id> l2-
general-querier-source <source>
Configure the source address of a general
query from a layer 2 general querier.
ip igmp snooping vlan <vlan-id> mrouter-
port interface <interface
–name>
no ip igmp snooping vlan <vlan-id>
mrouter-port interface <interface
–name>
Configure static mrouter port of vlan. The no
form of the command cancels this
configuration.
ip igmp snooping vlan <vlan-id> mrouter-
port learnpim
no ip igmp snooping vlan <vlan-id>
mrouter-port learnpim
Enable the function that the specified VLAN
learns mrouter-port (according to pim packets),
the no command will disable the function.
ip igmp snooping vlan <vlan-id> mrpt
<value >
no ip igmp snooping vlan <vlan-id> mrpt
Configure this survive time of mrouter port.
T
he “no ip igmp snooping vlan <vlan-id> mrpt”
command restores the default value.
ip igmp snooping vlan <vlan-id> query-
interval <value>
no ip igmp snooping vlan <vlan-id> query-
interval
Configure this query interval. T
he “no ip igmp
snooping vlan <vlan-id> query-
interval”
command restores the default value.
ip igmp snooping vlan <vlan-id>
immediately-leave
no ip igmp snooping vlan <vlan-id>
immediately-leave
Enable the IGMP fast leave function for the
specified VLAN: the “no ip igmp snooping vlan
<vlan-id> immediate- leave” command disables
the IGMP fast leave function.
ip igmp snooping vlan <vlan-id> query-
mrsp <value>
no ip igmp snooping vlan <vlan-id> query-
mrsp
Configure the maximum query response
period. The “no ip igmp snooping vlan <vlan-
id> query-
mrsp” command restores to the
default value.
ip igmp snooping vlan <vlan-id> query-
robustness <value>
no ip igmp snooping vlan <vlan-id> query-
robustness
Configure the query robustness. The “no ip
igmp snooping vlan <vlan-id> query-
robustness” command restores to the default
value.
ip igmp snooping vlan <vlan-id>
suppression-query-time <value>
no ip igmp snooping vlan <vlan-id>
suppression-query-time
Configure the sup pression query time. The “no
ip igmp snooping vlan <vlan-id> suppression-
query- time” command restores to the default
value.