QTECH QSW-3400 Инструкция по настройке - Manual (Page 177)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
176
[recovery <30-3600>]
no spanning-tree portfast
boundary port. bpdufilter receives the
BPDU discarding; bpduguard receives
the BPDU will disable port; no parameter
receives the BPDU, the port becomes a
non-boundary port.
6. Configure the format of MSTP
7. Configure the spanning-tree attribute of port
8. Configure the snooping attribute of authentication key
Command Explanation
Port Mode
spanning-tree format standard
spanning-tree format privacy
spanning-tree format auto
no spanning-tree format
Configure the format of port spanning-
tree packet, standard format is provided
by IEEE, privacy is compatible with
CISCO and auto means the format is
determined by checking the received
packet.
Command Explanation
Port Mode
spanning-tree cost
no spanning-tree cost
Set the port path cost.
spanning-tree port-priority
no spanning-tree port-priority
Set the port priority.
spanning-tree rootguard
no spanning-tree rootguard
Set the port is root port.
Global Mode
spanning-tree transmit-hold-count <tx-hold-
count-value>
no spanning-tree transmit-hold-count
Set the max transmit-hold-count of port.
spanning-tree cost-format {dot1d | dot1t} Set port cost format with dot1d or dot1t.
Command Explanation
Port Mode
spanning-tree digest-snooping
no spanning-tree digest-snooping
Set the port to use the authentication
string of partner port. The no command