QTECH QSW-3400 Инструкция по настройке - Manual (Page 135)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
134
7. Set Hybrid port
8. Disable/Enable VLAN Ingress Rules
9. Configure Private VLAN
10. Set Private VLAN association
11. Specify internal VLAN ID
Port Mode
switchport access vlan <vlan-id>
no switchport access vlan
Add the current port to the specified VLAN.
The “no” command restores the default
setting.
Command Explanation
Port Mode
switchport hybrid allowed vlan {WORD | all |
add WORD | except WORD | remove WORD}
{tag | untag}
no switchport hybrid allowed vlan
Set/delete the VLAN which is allowed by
Hybrid port with tag or untag mode.
switchport hybrid native vlan <vlan-id>
no switchport hybrid native vlan
Set/delete PVID of the port.
Command Explanation
Global Mode
vlan ingress enable
no vlan ingress enable
Enable/Disable VLAN ingress rules.
Command Explanation
VLAN mode
private-vlan {primary | isolated | community}
no private-vlan
Configure current VLAN to Private VLAN.
The no command deletes private VLAN.
Command Explanation
VLAN mode
private-vlan association <secondary-vlan-
list>
no private-vlan association
Set/delete Private VLAN association.