QTECH QSW-3400 Инструкция по настройке - Manual (Page 256)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
255
packet to the server;
replace, the system replaces
option 38 of current packet with
its own before forwarding it to
the server. no command
configures the reforward policy
of DHCPv6 packets with option
38 as replace.
ipv6 dhcp snooping subscriber-id select (sp | sv | pv |
spv) delimiter WORD (delimiter WORD |)
no ipv6 dhcp snooping subscriber-id select delimiter
Configures user configuration
options to generate subscriber-
id, no command restores to its
original default configuration, i.e.
enterprise number together with
vlan MAC.
ipv6 dhcp snooping subscriber-id select (sp|sv|pv|spv)
delimiter WORD (delimiter WORD |)
no ipv6 dhcp snooping subscriber-id select
delimiter
Configures user configuration
options to generate subscriber-
id. The no command restores to
its original default configuration,
i.e. vlan name together with port
name.
Port mode
ipv6 dhcp snooping remote-id <remote-id>
no ipv6 dhcp snooping remote-id
This command is used to set the
form of adding option 37 in
received DHCPv6 request
packets, of which <remote-id> is
the content of remote-id in user-
defined option 37 and it is a
string with a length of less than
128. The no operation restores
remote-id in option 37 to
enterprise-number together with
vlan MAC address.
ipv6 dhcp snooping subscriber-id <subscriber-id>
no ipv6 dhcp snooping subscriber-id
This command is used to set the
form of adding option 38 in
received DHCPv6 request
packets, of which <subscriber-
id> is the content of subscriber-id