QTECH QSW-3400 Инструкция по настройке - Manual (Page 82)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
81
uldp enable
uldp disable
Enable or disable ULDP function on a port.
3. Configure aggressive mode globally
Command Explanation
Global configuration mode
uldp aggressive-mode
no uldp aggressive-mode
Set the global working mode.
4. Configure aggressive mode on a port
Command Explanation
Port configuration mode
uldp aggressive-mode
no uldp aggressive-mode
Set the working mode of the port.
5. Configure the method to shut down unidirectional link
Command Explanation
Global configuration mode
uldp manual-shutdown
no uldp manual-shutdown
Configure the method to shut down
unidirectional link.
6. Configure the interval of Hello messages
Command Explanation
Global configuration mode
uldp hello-interval <integer>
no uldp hello-interval
Configure the interval of Hello messages,
ranging from 5 to 100 seconds. The value is
10 seconds by default.
7. Configure the interval of Recovery
Command Explanation
Global configuration mode
uldp recovery-time <integer>
no uldp recovery-time <integer>
Configure the interval of Recovery reset,
ranging from 30 to 86400 seconds. The value
is 0 second by default.
8. Reset the port shut down by ULDP