QTECH QSW-3400 Инструкция по настройке - Manual (Page 134)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
133
2. Set or delete VLAN name
3. Assigning Switch ports for VLAN
4. Set the Switch Port Type
5. Set Trunk port
6. Set Access port
Command Explanation
Global Mode
vlan WORD
no vlan WORD
Create/delete VLAN or enter VLAN Mode
Command Explanation
VLAN Mode
name <vlan-name>
no name
Set or delete VLAN name.
Command Explanation
VLAN Mode
switchport interface <interface-list>
no switchport interface <interface-list>
Assign Switch ports to VLAN.
Command Explanation
Port Mode
switchport mode {trunk | access | hybrid} Set the current port as Trunk, Access or
Hybrid port.
Command Explanation
Port Mode
switchport trunk allowed vlan {WORD | all |
add WORD | except WORD | remove WORD}
no switchport trunk allowed vlan
Set/delete VLAN allowed to be crossed by
Trunk. The “no” command restores the
default setting.
switchport trunk native vlan <vlan-id>
no switchport trunk native vlan
Set/delete PVID for Trunk port.
Command Explanation