4 port troubleshooting, Roubleshooting – QTECH QSW-3400 Инструкция по настройке User Manual

Page 73

Advertising
background image

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1

72

Switch3(Config-If-Ethernet1/12)#exit

5.4 Port Troubleshooting

Here are some situations that frequently occurs in port configuration and the advised solutions:

Two connected fiber interfaces won’t link up if one interface is set to auto-negotiation

but the other to forced speed/duplex. This is determined by IEEE 802.3.

The following combinations are not recommended: enabling traffic control as well as

setting multicast limiting for the same port; setting broadcast, multicast and unknown

destination unicast control as well as port bandwidth limiting for the same port. If such

combinations are set, the port throughput may fall below the expected performance.

Advertising