Micromod MOD: 30MLTraining Manual User Manual
Page 107
Advertising
Training Manual
PID Loop Lab
Figure 6 .40.
Connections from
PID block
parameters to
Display block inputs
20. The display compound from the Component Gallery is set up for 0 to 100. This must be
changed to match the PID block that we configured for 0 to 200. We must also designate
a display tag.
• Double-click on the Display block. In the resulting dialog box, type FIC-100 in
the Display Tag field (overwrite the PID-100).
Figure 6 .41.
Entering the
Display Tag in the
Display Block
6 - 27
Advertising
This manual is related to the following products: