Micromod MOD: 30MLTraining Manual User Manual
Page 252
Training Manual
Piecewise Linearization Lab
B – COMPLETE THE DATABASE, COMPILE AND SAVE
32. Connect the Result (R) of the FW LN block to the INPUT of the
Analog Output block.
33. Close the Loop Compound
34. Open the Display Interface Block (DIF) and add the tag LIC-100
to the Display Tag list.
Specify User Display to be used at power up and enter LIC-100.
35. Add an MSC block to the database and make sure it is set for
RS-232 Built In communications.
36. Compile the database and create a MIF file using a filename of
your choice, such as DRUM or LEVEL.
37. SAVE YOUR DATABASE!
D – DOWNLOAD AND VIEW THE TUNING PAGES
38. Open the OPC server and add the device
39. Return to ViZapp and download the database
40. From the front panel of the controller, press and hold the Scroll
key. Enter the Tuning password, then scroll through the displays
to view the X,Y coordinate entry pages.
18 - 12