Micromod MOD: 30MLTraining Manual - Manual (Page 161)

Training Manual
Peer-to-Peer Communications
Figure 10 .6.
Multi-Segment
Connection Icon
• Click on the IC block in the workspace: the Parameter connection list will appear.
• Double-click on R (the output of the block, which is the signal from the other instrument)
Figure 10 .7.
IC Block
Connection Menu
• Drag the line from the IC block directly over the middle of the PID block
• Click on the PID block: the Parameter connection list will appear.
• Double-click on OPTI (the output track input)
10 - 5