Micromod MOD: 30MLTraining Manual - Manual (Page 214)

Training Manual
Process Alarm Display Lab
4 Drag the cursor into the PALM_H block and select
the block
5 The only possible connection is ALARMINP (alarm
input); this is done automatically by ViZapp You now have a line from the PID block
to the PALM_H block
6 Return to EDIT mode by selecting the arrow on the
right toolbar
7 To check your connection, open the PAD block and
select the INCOMING tab.
D – CONFIGURE A LOW ALARM:
1 Using the printout provided, repeat this exercise to configure and connect a low process
alarm with the following characteristics:
Block Tag PALM_L
Display Tag FIC-100
Line 1 Text FIC-100
Line 2 Text FLOW LO
Condition Less or equal
Value 50
Display Format Float 1
Range 0 to 200
Engineering Units GPM
E – COMPILE THE DATABASE:
1 Save your database.
2 Compile and download your configuration. Check your alarms by changing the input to
the unit to create the alarm conditions. View and acknowledge the alarms.
3 If you are using the MOD 30ML demonstration box, use Pot #2 to vary the “process”
input and trigger the alarms.
14 - 4