Micromod MOD: 30MLTraining Manual - Manual (Page 114)

Training Manual
PID Loop Lab
• Double-click on this item to open it. The tree will expand and will display the
blocks inside the Control group.
Figure 6 .50.
Browse
• Click on the item FIC-100. This will display the attributes of the FIC-100 (PID
block) in the box on the right.
• Click on OP (PID output) and then on the Add button at the bottom to add the PID
output to the CL block. DO not hit the OK button !
• Select SP, PVI, SPMS and OPMS from this list and add them in the same way.
a
You can select multiple attributes by pressing the Ctrl key on the keyboard and by
clicking on them with the left mouse button. Hit the Add button after multiple selection
to all the selected attributes.
6 - 34