Micromod MOD: 30MLTraining Manual - Manual (Page 139)

Training Manual
Extended MODBUS OPC Server
Figure 8 .4.
MICROMOD
Extended MODBUS
OPC Server
database
5. Save the database: The OPC tag database can be save as a file with an extension
.MOPC.
• Select File – Save from the menu bar. Refer to the following figure.
• The Save As dialog box will be displayed next as shown below:
• Choose the same folder where you have saved the PIDLAB database for saving
this file and then type a name for the OPC tag database file in the File name field.
Figure 8 .5.
File – Save As
• Click on the Save button to save the file. The Title bar of the OPC Server will
redisplay with the saved file name.
• You can now either close the Extended MODBUS OPC Server application by
selecting File – Exit from the menu bar at the top or minimize it.
8.3.2 Part 2
6. Switch back to the ViZapp Designer. Your instrument document should be on the right
frame. Select Instrument – Download from the menu bar at the top.
• The Communication Setup dialog box will be displayed as shown below:
8 - 5