Micromod MOD: 30MLTraining Manual - Manual (Page 242)

Training Manual
Piecewise Linearization Lab
18.3 PART I – Piecewise and Linearization Blocks
Instructions
A – SELECT AND PLACE THE REQUIRED BLOCKS
Step Procedure Comments
1. Open a new Mod Function Block Diagram.
2. Place a new Loop Compound block in the workspace and call it
DRUM LEVEL.
3. Open the compound. From the Algorithm library, select and
place the following blocks:
Two AIN (built-in analog input) blocks
Two VCI blocks
One PID block
One PW (piecewise) block
One LN (linearization) block
One AOUT (built-in analog output) block
Your workspace should look something like this:
18 - 2