Micromod MOD: 30MLTraining Manual User Manual
Page 133
Advertising
Training Manual
Creating a Tuning List
Figure 7 .10.
TL Block
• Close the dialog box and the Tune List block with the OK buttons.
5.
Connect the Tune List block:
• Click on the Multi-Segment connection item on the Algorithms menu to enable
connection mode. See figure below:
Figure 7 .11.
Algorithm -
Connection
• Move to the workspace on the right and click on the TL block’s output connection
point as shown in the next figure. Notice that moving the cursor over the output of
a block, shows a fly-by box. This box shows the name of the output (for example,
in this case LISTOUT).
7 - 9
Advertising
This manual is related to the following products: