Micromod MOD: 30MLTraining Manual - Manual (Page 84)

Training Manual
PID Loop Lab
Figure 6 .6.
New Project
• Type the name CLASS for your project in the name field. Notice that the name of
the location for this project changes to C:\Class. It creates a folder under the C:
drive (or any other drive you choose) automatically.

All project files and the instrument and display documents will be saved in this folder.
This makes project portability easier.
• Click on the option Create a new Workspace. This will create a new workspace
for us. Click on OK.
• The configurator will redisplay with a new workspace and a project as shown
below:
6 - 4