Micromod MOD: 30MLTraining Manual - Manual (Page 26)

Training Manual
MOD 30ML Operation Lab 2
11 Scroll to TIC-100 display Temperature setpoint ramping down to cool
setpoint
12 When batch cycle has entered
DRAIN cycle, scroll to level display Falling reactor level as vessel is drained
13 Scroll back to the main display When drain cycle is finished (level has returned to
0) and current step shows as END.
Figure 2 .11.
Batch End
13 Press the MANUAL key, change the
step to OFF, and press the AUTO
key to return the batch to OFF
status.
Press the MAN key again to change
to automatic mode. The display will look like the initial display as
shown in Figure 2 .3.
The batch can be repeated now.
2 - 10