Micromod MOD: 30MLTraining Manual - Manual (Page 89)

Training Manual
PID Loop Lab
• Outgoing
• Connect map
• Shape
Configuration parameters related by common nature are grouped into these tabs. This
helps to display of information in a logical manner. Most fields under these tabs contain
default values that need not be changed.
5. Add a loop compound. We will configure our control loop inside this loop compound.
• Select the Loop Cpd (Loop compound) block from the Algorithms window add it
to the document. Do this by first locating the block in the menu by selecting the
All submenu at the bottom and then by dragging the scroll bar on the right
up/down. See the next figure:
Figure 6 .12.
Algorithms menu
• Drag the Loop Cpd block (Loop Compound) from the Algorithms menu on the left
frame to the right frame. Click on the Loop Cpd block with your left mouse button
and then drag it to the instrument document. Click on the mouse button to place
the Loop compound block with the other existing blocks (IF, SE, DIF and ST) on
the right frame.
6. Configure a name and description for the Loop Compound: Click once on this block
with your right mouse button. A menu as shown in the next figure will appear.
6 - 9