Micromod MOD: 30MLTraining Manual - Manual (Page 191)

Training Manual
Sequence Lab
Figure 12 .18.
SEQ Properties -
Outputs Tab
 Notice that these outputs are assigned initial values that can be changed by the step
logic. These outputs can be connected to other blocks in the database and also to the
field via the output modules.
9. Define the Sequence Steps
We have defined the inputs to the sequence block, and the outputs it will control. All that
remains is to define the steps in the sequence, and the logic that controls the step changes.
We will add 6 steps to the sequencer (IDLE, CHARGE, HEAT, COOK, COOL and DRAIN).
• Click on the Steps tab of the SEQ Properties dialog.
12 - 13