Micromod MOD: 30MLTraining Manual - Manual (Page 169)

Training Manual
Peer-to-Peer Communications
Figure 10 .21.
PID Block
Connection Menu
4. Configure an Output Communication Block:
• Select the OC (Output Communications) block from the Algorithms window and add it to the
document near to the PID block. Note: The OC blocks can only be added from within a Loop
Compound.
Figure 10 .22.
Algorithm – OC
Block
• Double-click on the OC block to configure: The OC block Properties will open.
• Click on the pull-down menu to configure the Data Type of the signal being received from the
other instrument.
• We will use the default data type of Floating point.
10 - 13