Micromod MOD: 30MLTraining Manual - Manual (Page 165)

Training Manual
Peer-to-Peer Communications
• Drag the line from the PID block directly over the middle of the OC block
• Click on the OC block: the Parameter connection list will appear.
• Double-click on INPUT
Figure 10 .14.
OC Block
Connection Menu
• The connection will now be complete. The connection line will have the source name and
destination name displayed right on it as shown in the figure below. The output signal from the
PID block will be sent to the other instrument on the ICN for use in its control strategy.
Figure 10 .15.
Connecting blocks
• Compile and download your database to instrument 1
10 - 9