Micromod MOD: 30MLTraining Manual - Manual (Page 30)

Training Manual
Single Loop Template Lab
3.3.3 Front face Configuration Map:
The front face configuration map shows an overview of the menus available front the front
of the MOD 30ML controller. The major menu items at the top level can be scrolled
through, by selecting NXT from the front face while DEVICE is displayed on line 1.
1. DEV STAT – This menu allows you to access the following sub menus: (The sub
menus are reached by pressing the DOWN arrow from the main menu.)
• INSTSATE – Read and change instrument state
• SHUTDOWN – Read and acknowledge the instrument shut down
• COMMANDS – Issue commands like acknowledge alarms, clear event queue,
delete and restore main database etc., to the controller
• XTIME – Read the scan times
• TIME – Read and setup the real time clock of the controller
• DATE – Read and setup the real time date of the controller
• DAY – Read and setup the real time day of the week of the controller
2. SETUP – This menu is further divided into the following sub menus
• BI COMM – Setup built-in communication port parameters and instrument
address
• PASSWORD – Setup configuration and tuning password for the controller
3. I/O – Read I/O and change outputs
4. EVENTS – Read and clear system event queue
5. ABOUT – Read the controller and display firmware revision levels
6. TEMPLATE – Read and edit System compound for system parameters and insert and
edit user templates for configuring Single loop and Cascade PID control loops. This
menu has the following sub menus:
• System Compound
• User Compounds
The front face configuration map is shown in appendix. You can use this map for
reference and as a navigation tool for going through and setting up the menus and
configuration from the controller front face.
3 - 4