Micromod MOD: 30MLTraining Manual - Manual (Page 115)

Training Manual
PID Loop Lab
Figure 6 .51.
CL block
• Click on OK on the Browse dialog. This will redisplay the CL block Properties as
shown above. The Inputs Tab will now display the attributes you just added.
a
The attributes will be displayed with full source path name of the connections. An alias
can be entered by selecting an item and typing in any alias name. This name will then
be displayed instead of the block tag and attribute name.
24. Assign Aliases to the tags added to the CL block: Select Control.FIC-100.OP by clicking
on it and then clicking on the Modify button.
• The Specify Input dialog will be displayed next.
• Type an alias FICOP in the Name field as shown below and then click on OK.
Figure 6 .52.
Alias
• Repeat the above procedure to assign aliases for the other attributes as shown
below:
6 - 35