Micromod MOD: 30MLTraining Manual - Manual (Page 86)

Training Manual
PID Loop Lab
Figure 6 .8.
New Document
• The New dialog box shows the Document tab now. Select the type MOD
Function Block diagram by clicking on it and then type the name PIDLAB for
the document in the Name field.
• This document will be created in the project folder \class automatically and will be
added to your Class project by default. See figure above.

When you create a new project, a file with the project name and file extension .APRJ
will be created. This file is called project file in the ViZapp installation directory.
The instrument document/ configuration files (MOD Function block diagram files) will
have extension .AFBD and will be saved in the project folder.
The workspace we created will be saved as a file with extension .AWSP (Class.awsp) and
a file with same name and .FEQP extension (Class.feqp) in the root folder where the
project folder is located.

IF you move your workspace and project to a different location/ drive, move the
project folder and the two files for the workspace (.AWSP and .FEQP), maintaining
their relative location.
• Click on OK. This will display the Choose Instrument Version dialog box as
shown in the next figure: This dialog box will display the different instrument ID
module versions (MODCELL and MOD 30ML).
6 - 6