Micromod MOD: 30MLTraining Manual User Manual
Page 167
Training Manual
Peer-to-Peer Communications
• Analog signals are generally Floating Point. For this exercise, choose this option by moving the
cursor over “Floating point” and clicking it.
• Click on the Data Source tab at the top of the dialog box.
Data Source
• The Instrument Number is the ICN Address of the instrument from which the data will be
received. For this lab, we will use 1.
• The OC Number is the Occurrence Number of the Output Communications Block in the
instrument from which the data will be received. We will use 1 for now, though it will need
verification after the other instrument’s database has been completed and compiled.
• The Port Number can be either 1 or 2 for a MOD 30ML. The Built-In Port or a module in slots
9 and 10 would be Port 1. For this lab, you will be using a module plugged into slots 7 and 8,
the Port 2 location.
• Click OK to close the dialog box.
• Select the Multi-Segment Connection icon in the Algorithms window
• Click on the IC block in the workspace: the Parameter connection list will appear.
• Double-click on R (the output of the block, which is the signal from the other instrument)
10 - 11