Micromod MOD: 30MLTraining Manual User Manual
Page 170
Training Manual
Peer-to-Peer Communications
OC Block
Properties
• Click on the Data Destination tab at the top of the dialog box.
Data Destination
• The Instrument Number is the ICN Address of the instrument to which the data will be sent.
For the purposes of this lab we will enter an address of 1.
• The IC Number is the Occurrence Number of the Input Communications Block in the
instrument to which the data will be sent. We will use 1 for now, though it will need
verification after the other instrument’s database has been completed and compiled.
• For this lab, you will be using a module plugged into slots 7 and 8, the Port 2 location.
• Click OK to close the dialog box.
• Select the Multi-Segment Connection icon in the Algorithms window
• Click on the PID block in the workspace: the Parameter connection list will appear.
• Double-click on ARSP (the adjusted remote setpoint)
10 - 14