Micromod MOD: 30MLTraining Manual - Manual (Page 145)

Training Manual
Extended MODBUS OPC Server
Figure 8 .15.
Device Properties
• Click on Cancel on this dialog.
Figure 8 .16.
OPC Live Data
10. View Live data by starting the built-in OPC client application:
• Select View - Monitor from the menu bar at the top. This will start the built-in
OPC client and show live data from the instrument in the Value column of the
OPC Server application. Refer to the figure above.
• To change a value for a tag that is writable in the device, right-click on the tag
name and select Write Value. Writing to a read-only tag will produce an error.
8 - 11