Micromod MOD: 30MLTraining Manual - Manual (Page 248)

Training Manual
Piecewise Linearization Lab
6. Double-click on the DISP block to open it, and make the
following entries:
Name: LVL DISP
Description: Drum Level operating display
Display Tag: LIC-100
7. Click OK to close the block.
8. Select the Multi-Segment connection icon from the Algorithms
window.
9. Click on the PID block and select OP from the list.
10. Drag the cursor over the DISP block and select it.
11. Select the attribute “output” from the list.
12. Make the following additional connections from the PID block to
the DISP block:
PID.PVI to DISP.process
PID.SP to DISP. setpoint
18 - 8