Micromod MOD: 30MLTraining Manual - Manual (Page 250)

Training Manual
Piecewise Linearization Lab
20. Click OK to close the Browse dialog All the added attributes now appear in the
TL Properties Inputs tab.
21. Select the number 1 under Inputs and click on the Modify…
button at the bottom of the window
You can also double-click the number 1
22. Make the following entries in the Specify Input Data window:
Display Format Name: Action
Line 2 Text: ACTION
Click OK to close the dialog box.
The Display Format “Action” was
predefined in the compound.
The first line of text will be the Display
Tag name (LIC-100)
23. Enter the Input Data for Inputs 1 and 2 (Gain, Reset) as follows:
Input 2
Display Format Name: Gain
Line 2 Text: GAIN
Input 3
Display Format Name: Reset
Line 2 Text: RESET
24. Click on the Formats tab at the top of the TL Properties window
25. Click the Add button at the bottom of the window The Specify Format Data window appears
26. Enter the following:
Name: F (an arbitrarily chosen name)
Format type: Float 1 (floating point, one decimal place)
Low limit: -1e+008
High limit: 1e+008
Entry method: Entry required
The new format is now added to the
Format list, and ready to be used by
inputs.
18 - 10