Micromod MOD: 30MLTraining Manual User Manual
Page 183
Advertising
Training Manual
Sequence Lab
Figure 12 .5.
I/O Graphic menu
• The I/O Graphic will be displayed next as shown below: Notice that except for the built-
in I/O and Communication, all the modules are placed on Slot 1 by default.
• Move the modules with the left mouse button held down to other locations so that the
modules do not overlap.
Figure 12 .6.
MOD30ML I/O
Graphic - default
placement
• After relocating the modules, your I/O Graphic should look something like the one in the
next figure.
12 - 5
Advertising
This manual is related to the following products: