Micromod MOD: 30MLTraining Manual - Manual (Page 127)

Training Manual
Creating a Tuning List
Figure 7 .3.
Browse
• The Browse dialog will be displayed as shown above and will list all the blocks
and compounds that are present in your document as a tree structure. These will be
shown with box icons next to them meaning that there groups and there are further
items inside each group.
• You should see the FIC-100 block (the PID block) on this tree.
• Click on FIC-100 to open it. The tree will expand and will display the PID block
parameters.
Figure 7 .4.
Browse
• Click on BGAIN (base gain) and then on the Add button at the bottom to add the
Gain to the Tune List. DO not hit the OK button !
7 - 3