Micromod MOD: 30MLTraining Manual User Manual
Page 225
Training Manual
CJC and Display Lab
3.
When you have finished typing the script, click
on the Checkmark icon at the top of the
window.
This will verify your script immediately, checking
for syntax errors.
4.
Once the script is verified without error, close
the Display Block using the OK button.
E – CONNECT THE BLOCKS
Step Procedure
Comments
1.
Click on the Connections icon
You may use either right-angle or multi-segment
2.
Using the mouse to select the blocks and entries,
make the following connections:
TT-100.MODOUT to TI-100.MODIN
TT-100.CJC to TempDisp.CJC
TI-100.R to TempDisp.TI
F - ADD THE DISPLAY TO THE DISPLAY LIST
Step Procedure
Comments
1
Close the compound.
You should see the Environment Blocks (DIF, ST,
SE, IF) in your workspace.
2
Double-click on the DIF block
3
Click on the “NEW” icon above the Display List
4
At the bottom of your display list add:
TI-100
This is the Display Name, NOT the name of the
display block!
6
Select OK to close the block.
Save, compile and download the database.
When you select the tag TI-100, the scroll key will toggle between the measured temperature and the cold junction
temperature (which should be room temperature in degrees Celsius).
16 - 5