Micromod MOD: 30MLTraining Manual - Manual (Page 134)

Training Manual
Creating a Tuning List
Figure 7 .12.
Connecting blocks
• Move the cursor to the Display block’s input now. Moving the cursor will draw a
line.
Figure 7 .13.
Connecting blocks
• You will get a fly-by box that will say LISTIN when you move over the input.
• Click on the input of the Display block. See the figure above.
Figure 7 .14.
Connecting blocks
• The connection will now be complete. The connection line will have the source
name and destination name displayed right on it as shown in the above figure.

Once the configuration has been compiled and downloaded to the controller, the Tune
List attributes may be accessed by pressing and holding down the Scroll key.
7 - 10