FEC AFC1500 - Manual (Page 41)

FEC AFC1500 Operations Manual Chapter 3: System Description (Rev. 6:10/09)
Page 3-11
3.4.4 SAN(3)-DP2/DP4 Data Format Description
The table below describes the data convention output from the SAN(3)-DP2/DP4 serial port.
Non-data bytes will be occupied by the hex character 20H.
Data Name Byte # Data Format Description
Cycle Count 1 ~ 4 0000-9999 Number is reset at Power Off
Spindle Number 7 ~ 8 01 – 31 Maximum 31 spindles
Parameter Number 12 ~ 13 1 – 16 Maximum 16 parameters
Peak Torque 16 ~20 01.34
Decimal point location may change based
upon the tool type and torque unit.
Peak Torque Judgment 21
H: High Reject
L: Low Reject
ASCII space (20H) will apply if judgment is
accepted
Final Angle 23 ~ 26 1234 4 digit number. No decimal point used
Final Angle Judgment 27
H: High Reject
L: Low Reject
ASCII space (20H) will apply if judgment is
accepted
Final Torque 29 ~ 33 01.34
Decimal point location may change based
upon the tool type and torque unit.
Final Torque Judgment 34
H: High Reject
L: Low Reject
ASCII space (20H) will apply if judgment is
accepted
1st Rate 36 ~ 40 01.23
Decimal point location may change based
upon the tool type and torque unit.
1st Rate Judgment 41
H: High Reject
L: Low Reject
ASCII space (20H) will apply if judgment is
accepted
2nd Rate 43 ~ 47 01.23
Decimal point location may change based
upon the tool type and torque unit.
2nd Rate Judgment 48
H: High Reject
L: Low Reject
ASCII space (20H) will apply if judgment is
accepted
3rd Rate 50 ~ 54 01.23
Decimal point location may change based
upon the tool type and torque unit.
3rd Rate Judgment 55
H: High Reject
L: Low Reject
ASCII space (20H) will apply if judgment is
accepted
1st Time 57 ~ 61 123.4 Decimal point location fixed
1st Time Judgment 62 H: High Reject
ASCII space (20H) will apply if judgment is
accepted
2nd Time 64 ~ 68 123.4 Decimal point location fixed
2nd Time Judgment 69 H: High Reject
ASCII space (20H) will apply if judgment is
accepted
Total Judgment 73
O: Accept
X: Reject
Carriage return 77 ODH
Line feed 78 OAH