FEC AFC1500 - Manual (Page 81)

FEC AFC1500 Operations Manual Chapter 4: System Setup and Wiring (Rev. 6:10/09)
Page 4-37
4.11.7 Resolver Connector
The resolver connector handles the signals which define the rotation of the motor.
The controller provides a signal to the winding of the rotor. As the rotor spins, two sets of sta-
tors electrically shifted 90 degrees generate a sine wave and a cosine wave signal. Both sig-
nals are processed by the controller to define position and speed of the motor.
PIN DESCRIPTION
1 ROTOR (R1)
2 STATOR (S2)
3 STATOR (S1)
4 NOT USED
5 NOT USED
6 ROTOR R2
7 STATOR S4
8 STATOR S3
9 SHIELD
10 NOT USED
FIG.4.11.3: Resolver connector
Mating Connector: Molex #39-01-2105 Pin #39-00-0047
1
5
6
10