FEC DSP1500 (SAN3) - Manual (Page 22)

enFORCE DSP1500 SAN Unit Operation Manual
(Rev. 4) PAGE 2－2
Chapter 2: Specifications
2.1 System Specifications
Power Supply Voltage 180VAC ~ 242VAC, 3 phase, 50/60Hz
Operating Conditions
Temperature 32 ~ 122°F (-0 ~ 50°C)
Humidity 20 ~ 90% (no condensation)
Storage Conditions
Temperature 32 ~ 122°F (-0 ~ 50°C)
Humidity Below 90% (no condensation)
Shipping Conditions
Temperature 32 ~ 122°F (-0 ~ 50°C)
Humidity Below 90% (no condensation)
Operating Range Duty Cycle less than 60%
Load stop accuracy 1
DPT &
DPM Series
From 1/2 to Full
Scale Load 3σ less than 3% scatter
of target load.
From 1/4 to 1/2 of
Full Scale Load 3σ less than 4% scatter
of target load.
DPS Series
From 1/4 to Full
Scale Load 3σ less than 1.5%
scatter of target load.
Load resolution Approx. 1/1000 of full scale load value
Load control range 25% -100% of full scale load value
Load judgment range 10% -100% of full scale load value
Distance stop accuracy
1,2 ± 0.01mm (-0.0 ~ +0.02mm)
Distance display minimum unit
０．１ｍｍ (0.001mm condition limit)
Distance internal control unit
０．００１ｍｍ
Load cell accuracy ± 1% (0 - full scale)
Load cell linearity ± 0.5% of Full Scale value (maximum)
Press method Load method / distance method
Ram tip pendant allowable load
1/6 or less of tool maximum load (up to 2kN)
(With brake option)
DPS-101R3-** tool is up to 0.6KN
1) When the press is operated according to FEC specifications.
2) When load is constant.