FEC DSP1500 (SAN3) - Manual (Page 88)

enFORCE DSP1500 SAN Unit Operation Manual
(Rev 4) PAGE 6－12
Chapter 6: System Operation
6.3.6 Parameter Display Mode
The following data is displayed on the screen in the Parameter Display Mode.
By pressing the [↑] and [↓] buttons, the [D-NO] changes and the value of the data number is
displayed in the [DATA] area.
If [↓] is pressed at the first data number of each parameter number, [PARM] parameter number will
increment by 1.
If [↑] is pressed at the last data number of each parameter number, [PARM] parameter number will
decrement by 1.
「
D-NO」 「PARM」 「DATA」
0 Load digit Number
0 SP Version
0 Amplifier Version
32 Decompression Speed
32 Return Speed
D-NO : 2 Digit Display
00
[↑] / [↓]
buttons
01
02
75
76