FEC DSP1500 (SAN3) - Manual (Page 78)

enFORCE DSP1500 SAN Unit Operation Manual
(Rev 4) PAGE 6－2
Chapter 6: System Operation
6.1 Display and Programming Unit
An optional detachable display / programming unit is available for the SAN Unit. The display unit
allows the viewing of press results as well as viewing / programming of press parameters if the DSP
software is not being used.
SAN3-DP1S
SAN3-DP2S (RS-232)
The DP2S has the same functionality as the DP1S with the added function of a serial RS-232 port
for output of press data from the associated SAN Unit. The RS232 port may also be used to input
external measurement data in applications requiring an external measurement probe.
System Parameter 00-37 must be set to enable the desired data output. Default
setting is “0”. If set to “0” no data will be output. (See page 6-22)
Н