Yokogawa Multi Channel Oxygen Analyzer System ZR22/AV550G - Manual (Page 102)

IM 11M12D01-01E 6-4
On this display, touch the indication area (enclosed by dotted line) of the desired
channel. A display shown in bottom in Figure 6.4 will appear. This display will show
the oxygen concentration (or cell temperature during warm-up) and average concentra-
tion data (groups a, b, and c) (show “---” if all channels are in warm-up period) of the
selected channel, which is called a single-channel display. To return to the previous
multi-channel display, touch the area enclosed by dotted line.
The operation status of the averaging converter is indicated by yellow marking at the
bottom of the display. Table 6.1 shows the types and conditions of the markings.
Warmup
Tag:
Hold
Ch1
514
Њ C
Ch2
515
Њ C
Ch3
513
Њ C
Ch4
514
Њ C
Warmup
Tag:
Ch1
514
Њ C
Ch2
515
Њ C
Ch3
513
Њ C
Ch4
514
Њ C
Ch5
514
Њ C
Ch6
514
Њ C
Ch7
513
Њ C
Ch8
---
Hold
Warmup
Tag:
Ch1
514
Њ
C
Ave-a ---
Ave-b ---
Hold
Ave-c ---
Switch Indication Area
4-channel Multi-channel Display 8-channel Multi-channel Display
Average Oxygen Concentrations
Status Indication Markings
Single-channel Display
Figure 6.4 Multi-channel Display and Single-channel Display