Yokogawa Multi Channel Oxygen Analyzer System ZR22/AV550G - Manual (Page 138)

IM 11M12D01-01E 8-12
<Default setting>
Alarm settings are set to defaults in Table 8.3 prior factory shipment or after data
initialization.
Table 8.3
Item Default
Hysteresis 0.1% O
2
Delay time 3 sec.
High High (HH) Alarm OFF
HH Alarm Setting 100% O
2
High (H) Alarm OFF
High Alarm Setting 100% O
2
Low (L) Alarm OFF
Low Alarm Setting 0% O
2
Low Low (LL) Alarm OFF
LL Alarm Setting 0% O
2
T8.3E.eps
CAUTION
If an alarm setting is OFF then the alarm is disabled. You need to turn alarms ON to
enable them.