Yokogawa Single Channel Oxygen Analyzer System ZR22/ZR402 - Manual (Page 128)

IM 11M13A01-02E 8-11
8. Detailed Data Setting
Output contact 1
᭜ Output contact 2
᭜
Output contact 3
᭜ lnput contacts
Enter
Contact setup
F8.7E.EPS
Enter
Alarms
᭜ Others
᭜ During power-off the
contact is open and
in condition it is Open
Output contact 1
F8.8E.EPS
Figure 8.7 Contact Setup Display Figure 8.8 Output Contact 1 Display
Warm up: ON
᭜ Range change: OFF
᭜ Calibration: OFF
᭜ Maintenance: ON
᭜ Blow back: OFF
᭜ Temp.input high: OFF
᭜ Cal.gas press.low: OFF
᭜ Process up set: OFF Enter
Contact1 Others
F8.9E.EPS
Figure 8.9 “Contact1 Others” Display