Yokogawa Single Channel Oxygen Analyzer System ZR22/ZR402 - Manual (Page 125)

IM 11M12A01-03E 8-13
8. Detailed Data Setting
Output contact 1
᭜ Output contact 2
᭜
Output contact 3
᭜ lnput contacts
Enter
Contact setup
F8.9E.EPS
Enter
Alarms
᭜ Others
᭜ During power-off the
contact is open and
in condition it is Open
Output contact 1
F8.10E.EPS
Figure 8.9 Contact Setup Display Figure 8.10 Output Contact 1 Display
Warm up: ON
᭜ Range change: OFF
᭜ Calibration: OFF
᭜ Maintenance: ON
᭜ Blow back: OFF
᭜ Temp.input high: OFF
᭜
Cal.gas press.low: OFF
᭜ Process up set: OFF Enter
Contact1 Others
F8.11E.EPS
Figure 8.11 “Contact1 — Others” Display