Yokogawa Single Channel Oxygen Analyzer System ZR22/ZR402 - Manual (Page 89)

IM 11M12A01-03E
6-1
6. Components
6. Components
In this chapter, the names and functions of components are described for the major
equipment of the EXAxt ZR Separate-type Zirconia High-temperature Humidity Ana-
lyzer.
6.1 ZR22G Detector
6.1.1 General-purpose Detector
Terminal box,
Non explosion-proof JIS
C0920 / equivalent to IP44D.
Equivalent to NEMA 4X/IP66
(Achieved when the cable entry
is completely sealed with a
cable gland in the recirculation
pressure compensated version.)
Probe
this part is inserted in the process.
Select length from 0.4,
0.7, 1.0, 1.5, 2.0, 2.5 or 3.0 m.
Flange
used to mount the detector.
Select from JIS or ANSI
standard models.
F6.1E.EPS
Bolt
Washer (or plain washer)
Pipe support U-shaped pipe
Metal O-ring
Dust filter mounting screw
Sensor (cell)
Contact
Screw
Probe
Calibration gas
pipe opening
Filter
Figure 6.1 General-use Detector